Re: Best way to connect/cable WAN/Internet to Mellanox Switch, Advice on...
Thank you for your input! Anyone else up for some of the other questions ? Hope so!
View ArticleRe: vSphere OFED 1.8.3 Beta
Not able to create host profile with iSER enabled. Error: Unknown.
View ArticleRe: vSphere OFED 1.8.3 Beta
Thank you for your reply. Let's wait patch for this problems...:)
View ArticleRe: LED light indicator on connectX-3 - possibly dead port
I found in an older connectX-2 pdf this statement. Blinking indicates a problem with the Physical link Which is odd for me as it does this with the SFP plugged in only no cable connected. This is...
View ArticleSX1012 Switch and connect to a Dell PowerConnect 2824
Hi All, I had a look around the forum and looks like one of the question is very close to what I'm think about. I'm looking to add a few Nutanix Nodes to my network, which connect via 10Gbe SFP+,...
View ArticleRe: SX1012 Switch and connect to a Dell PowerConnect 2824
Hi Chris, I think you can use the below: SX1012 - QSA - MC3208411-T - twister pair cable -> 2824 you would need to lower the port speed on the SX1012 to 1000 Mbps and your good to go. The QSA ( QSFP...
View ArticleRe: SX1012 Switch and connect to a Dell PowerConnect 2824
Hi eddie, Thanks for the response, just to clarify, Is The QSA ( QSFP to SFP adapater) PN is MAM1Q00A-QSA Actually the QSFP+ to SFP+ Thanks Chris
View ArticleRe: SX1012 Switch and connect to a Dell PowerConnect 2824
HI Eddie, Just another one, Would this cable be an option MC2609130-003...
View ArticleRe: SX1012 Switch and connect to a Dell PowerConnect 2824
Hi Chris, this will work only if you connect it to the sfp ports of the Dell switch.Please note that the cable MC2609130-003 will be able to work with 1G speed only in the coming MLNX-OS software...
View ArticleMLNX_OFED 1.5.2-2.1 available?
Our adapter card is based on the MT23108 InfiniHost device. It appears that the last release to support this was Mellanox OFED 1.5.2-2.1. Unfortunately, the MLNX_OFED Download Center archive only goes...
View ArticleRe: SX1012 Switch and connect to a Dell PowerConnect 2824
Hi Eddie, So I need the The QSA ( QSFP+ to SFP+ adapter) PN is MAM1Q00A-QSA to connect from the Switch to the Nutanix nodes (Servers) 10gbE SFP+ ports? Thanks Chris
View ArticleSockperf performance tuning (ConnectX-3 VPI NIC)
Dear all, we have just installed and experimented with ConnectX-3 VPI NIC, 1xQSFP,QDR cards (MEL-MCX353A-QCBT) with one 40 Gb/s IB port. Cards are in a PCIe3.0 socket (Max Link Speed OK, checked with...
View ArticleRe: MLNX_OFED 1.5.2-2.1 available?
Hello Brian Mellanox Support would be able to get this older version for you and put onto an FTP for download. I would suggest opening a support case by emailing support at: support@mellanox.com
View ArticleRe: MLNX_OFED 1.5.2-2.1 available?
Thank you. We actually just heard back from Mellanox support yesterday evening. They were very helpful. Should anyone else happen to need the drivers for 1.5.2, they are available here:Drivers &...
View ArticleRe: SX6018 default firmware
Where i can find an image-PPC_M460EX-SX_3.3.4304.img or newer to try to rewrite firmware?U-Boot is ok,and i am confident to write new image via tftp or serial console.Best regards
View ArticleFDR with unmanaged switch
I have been trying to set up a new cluster using an 18 port MSX6015 switch and 9 systems with connectx-3 cards/built in IB:08:00.0 Network controller: Mellanox Technologies MT27500 Family...
View ArticleVP appearance at JP Morgan conference disappeared from Yahoo Finance News
Between 8:30 and 9:30 EST this morning (May 14) on Yahoo finance news there appeared an announcement of a presentation at the JP Morgan conference by Mellanox VP of finance on next Tuesday, May 19....
View ArticleRe: VP appearance at JP Morgan conference disappeared from Yahoo Finance News
For the most accurate information on Mellanox, please use http://ir.mellanox.com as your primary source.
View Article