Clik here to view.
SX1012 link LED flashes red.
I have SX1012 in a test setup. Eth1/1 is connected to Connect-X3 56GbE NIC on Intel Xeon GPU server. I am using a split cable on eth1/2 and it is configure to have 4x10GbE, to which a custom FPGA board...
View ArticleClik here to view.
en3 not support tcpdump for broadcast
Any one knows this, tcpdump is not able to dump the broadcast pkts.Multicast, Unicast, Unknown Unicast are good to be dumped by tcpdump.Plus, ethtool -t ethx, self-test failed. Card infor: [root@test...
View ArticleClik here to view.
Re: Mellanox OFED 3.0 mlnx-ofa_kernel failed to build in sles12
The problem is that SLES 12 requires all init scripts under /etc/init.d to be LSB (Linux Standard Basic) compliant, and openibd does not.
View ArticleClik here to view.
Re: SX1012 link LED flashes red.
Hi Ramesh, The Ethernet port blinking Red (it's Orange Actually) - means that there are physical erros on the link. The LED labeled "!" which is the "Bad Port Led" indicates that a symbol error is...
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
That's interesting. Can you try the following CLI on the Cisco switch(6004). #"service unsupported-adapter". Let me know the result. ~Rage
View ArticleFirmware update failed
When I installed OFED 2.4, it failed to update my firmware.The error message is : Querying Mellanox devices firmware ... Device #1:---------- Device Type: ConnectX3 Part Number:...
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
I've contacted ProLabs and waiting to see if they can make a cable that might help us out.
View ArticleRe: Cisco Nexus 6004 and Mellanox QSFP
I already entered that command, but it did not work. See my original post for the error message.
View ArticleRe: Frequent TCP retransmissions with ConnectX-3 EN
I haven't tried the "options mlx4_core log_num_mgm_entry_size=-7" yet. However, I did upgrade my install OFED to 3.0-1.0.1 on all of my servers. No change. In my initial post, I mentioned that this...
View ArticleClik here to view.
What's the difference between MFA* and MFS* active fiber EDR cables ?
Hi, At mellanox.com ... products ... cables and transceivers .... bottom table MFA1A00-E005MLNX5m QSFP VPI EDR active fiberMFA1A00-E010MLNX10m QSFP VPI EDR active fiberMFA1A00-E015MLNX15m QSFP...
View ArticleRe: Firmware update failed
Hi Kai Ma, The MITAC_QDR PSID means that the HCA is an OEM/ODM card (I'm assuming manufactured by MITAC), MLNX_OFED only has fw for Mellanox GA PSID's (starting with MT_*)
View ArticleRe: What's the difference between MFA* and MFS* active fiber EDR cables ?
M is for Mellanox, not Multi-mode fiber. MFA the major family for Active Optics Cables (VCSELs)MFS is the major family for Active Optical Cables (Silicon photonics).
View ArticleClik here to view.
connectx_port_config never finds devices or driver not loaded
I'm trying to get two new EDR cards, MCX456A-ECA_Ax and MCX455A-ECA_Ax, working for ethernet purposes. I've installed what seems to be the newest OFED stack,...
View ArticleRe: connectx_port_config never finds devices or driver not loaded
Hi Phil, connectx_port_config script doesn't support Connectx-4 , it only supports ConnectX-2, ConnectX-3, XonnectX-3 Pro. For connectx-4 please use the mlxconfig tool: for example: mst startmlxconfig...
View Article