Clik here to view.
Re: Problems getting ISER working under Ubuntu 15.10
Sophie, You're saying that Ubuntu 15.10 isn't a supported platform? The MLNX_OFED download page disagrees with you. In any case, it's not worth the effort. I expect that there's someone out there who...
View ArticleClik here to view.
Voltaire Grid Director 4036
Hi all, A customer is using Voltaire Grid Director 4036 with current cluster. He wants to expand it (he will add 25 servers to a current cluster).So the question is... which type of switch would be the...
View ArticleRe: Observing long delay with RoCE using ConnectX-4 and SN2700
Thank you very much Eddie, I need to enable the PFC on the servers to follow your process. In our setup, the NICs are the latest Mellanox Connect X-4 VPI dual port NIC MCX456A-ECAT. It using the latest...
View ArticleClik here to view.
Re: Observing long delay with RoCE using ConnectX-4 and SN2700
Hi Weijia, Please follow the Configuring PFC section 3.1.8.1 in the MLNX-OFED User Manual (available from http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers )
View ArticleRe: ib_send_bw performance puzzle
Hello Weijia,Please provide exact syntax used with results for reproduction purpose. Perhaps, it's unique to your environment. Cheers,~Rage
View ArticleRe: ib_send_bw performance puzzle
Sure, the syntax is very simple: Server:# ib_send_bw -s 1025Client:# ib_send_bw <server ip> -s 1025 Please see the screen shot attached. By the way, here is the output of ibv_devinfo. By default,...
View ArticleSRP single dual-port HCA multipath config problem
I'm running into a problem where the "redundant" connection to a storage system is not coming online for a SRP initiator/target setup where we have a single server direct attached to a storage array....
View ArticleESX 5.5 U3 upgrade and missing VMNICs
Upgraded HP BL2x22c Gen7 blades from ESX 5.1 to 5.5 U3. Everything seemingly went well, but after the update only one of the VMNICs from my HP NC543i adapter is working. 5.1's driver:net-mlx4-en...
View ArticleConnectx-4 VPI driver for VMware
Just wanted to touch base and see if there are any planned VPI drivers for vmware and connectx-4 yet. Currently i believe only ETH is supported.
View ArticleRe: Observing long delay with RoCE using ConnectX-4 and SN2700
Hi Eddie, thank you very much for the help, here are the tests and results I have according to your suggestion. I hope this can help you to better identify the reason of the issue.Summary:1) MLNX-OS...
View ArticleClik here to view.
Re: Observing long delay with RoCE using ConnectX-4 and SN2700
Hi Weijia, MLNX-OS 3.5.0202 which was the first Beta code for the SN2700 switch didn't have the correct flow-control behavior. Please upgrade the switch to the latest 3.5.1006 code
View ArticleMCX416A-B and sx1012 QSFP compatibility
Hi, We are configuring 3 new servers for a small ESXi cluster (vSphere 6) and, because we already own a pair of SX1012 switches, we were looking at Mellanox for the adapters. We have 2 options:-...
View ArticleHow to build MLNX_OFED on Ubuntu 16.04
Hi there, I have a ConnectX3 Pro (MCX313A-BCCT) and I try to build the current release of MLNX_OFED (3.2-2.0.0.0) on a fresh Ubuntu 16.04 installation.Unfortunately (or "as expected"?) build fails,I...
View ArticleRe: How to build MLNX_OFED on Ubuntu 16.04
Hello, As Ubuntu 16.04 is not officially GA yet we do not yet an official driver for this release. However, you may contact Mellanox support in order to get a working drop for testing purposes.
View ArticleClik here to view.
Re: Observing long delay with RoCE using ConnectX-4 and SN2700
Thank you very much Eddie, Where can I download the firmware for this switch? I cannot find it here: http://www.mellanox.com/page/firmware_download .
View ArticleI have a trouble that I can't change Ethernet to Infiniband.
I am trying to connect two machines with infiniband (MCX353A-QCBT) in Ubuntu 14.04. But I failed. This is my state. (lspci, ifconfig, ibstat, ibnodes, /sbin/connectx_port_config, dmesg). Does anyone...
View ArticleRe: I have a trouble that I can't change Ethernet to Infiniband.
Hi Sangmuk Jo, Can you please send the output of:"ibv_devinfo" or1. mst start2. flint -d mlx4_0 q
View ArticleRe: I have a trouble that I can't change Ethernet to Infiniband.
Hi! My "ibv_devinfo" and "flint". sangmuk@sclab1:~$ ibv_devinfohca_id: mlx4_0 transport: InfiniBand (0) fw_ver: 2.36.5000 node_guid:...
View ArticleRe: I have a trouble that I can't change Ethernet to Infiniband.
Thanks, Do you have MLNX_OFED installed?
View ArticleRe: Observing long delay with RoCE using ConnectX-4 and SN2700
Hi, Please open a support case at support@mellanox.com and request to get the MLNX-OS 3.5.1006 X86 image
View Article