Re: IPoIB not working on Windows 2008 r2 - need help
Looks like I'm going to need an old version of mstflint from somewhere to determine for sure. A similar card in a linux box is reporting version 1.1.000, which apparently is old (the driver says that...
View ArticleRe: IPoIB not working on Windows 2008 r2 - need help
This is probably the link you want then: http://old.mellanox.com/content/pages.php?pg=management_tools&menu_section=34 That's the older Mellanox website, prior to their recent refresh. If the...
View ArticleRe: IPoIB not working on Windows 2008 r2 - need help
Thanks for that pointer. Unfortunately it appears that the card is actually a Cisco one: ID: Cheetah DDRPN: SFS-HCA-320-A1 which apparently complicates determining the appropriate firmware for the...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Well Done! And good job. looks very good. About the alert: what this switch is doing is: it sweeps the entire network and alerts if it finds a switch with an “different” FW revision then this current...
View ArticleRe: IPoIB not working on Windows 2008 r2 - need help
Doing some Googling turned up this: http://moca.espresso.gr.jp/wiki/wiki.cgi?page=InfiniBand (translate.google.com does ok with it) That seems to indicate the card is an MHGS18-XTC. Looking at...
View ArticleRe: IPoIB not working on Windows 2008 r2 - need help
I burned it with theMHGS18-XSC Rev A1:MT_03D0110002 firmware. It didn't destroy anything but it didn't help anything either. It seems like something is messed up with the IPoIB driver on windows.
View ArticleClik here to view.
OFED 2 SDP Support?? FYI OFED2 - ITS FASTER!
hiim testing OFED 2 on Ubuntu. its not tested on 13.04 but it works quite well except a few probsBut does anyone know if SDP is supported, I cant find anything in the docs about it, except a mention...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Are you able to access any kind of console over the ethernet, instead of com1? I'm kind of thinking you could update your parameters using the Get/Store configuration dialog in the Device Manager java...
View ArticleRe: ConnectX-3 EN on an ARM platform
Hi Stan, thanks for clarifying your question. I'll do some digging to see what I can find out for you. Can you tell me which board and ARM processor you're experimenting with? Thanks.
View ArticleRe: Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hmmm, I take that back. This is a dump of the configuration from my switch (upgraded to firmware 1.0.5): ebay_voltaire_isr9024d-m_original-repository.new_firmware-1.0.5 There doesn't seem to be...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
CAUTION! IF YOU HAVE NOT CONSOLE CABLE, DON'T COMMIT FACTORY DEFAULT COMMAND on anyother IB switch. Basically ISR9024D-M has a factory default configuration (192.168.1.2).If you commit factory default...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Ahhhh. Yeah, I don't have a serial cable. Well, actually I do have the cable, but none of the computer gear I have has a serial port. I'd have to buy a usb to serial converter or something.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Yair Ifergan - Is there any chance you guys still have the .ini files around used to generate the firmware for the old ISR 9024D-M switches, so people can try burning new firmware with customised...
View ArticleRe: Suggestions for *quiet* Infiniband switch?
Interesting update. Received my Voltaire ISR9024D-M this week. It came with firmware version 0.8.6 on it, and all of the ConnectX cards (MHGH28-XTC) were reporting as SDR speeds for every connected...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
There is my mis-typing point. In: serialOut: serialErr: serialNet: EMAC0, EMAC1BEDBUG:readyHit any key to stop autoboot: 0 --> *At this point - you can enterPPC-Console mode*booting secondary,...
View ArticleRe: Connect-X EN driver port questions
I have turned off BlueFlame on the TX path. I no longer have the delayed TX problem.
View ArticleClik here to view.
Voltaire ISR-9024D (NOT -M) Question
Good evening, I recently acquired a Voltaire ISR-9024D (not -M) switch for my home hobby/testing/etc lab, and I have a couple questions: 1) The fan module in this switch is very loud. I do not think it...
View ArticleVM Passthrough of MHQH19B-XTR
I'm trying to passthrough a MHQH19B-XTR card to a Solaris 11.1 VM on VMware ESXi 5.1 but had no luck so far. The core problem, based on my research, is that the card cannot handle the Function Level...
View ArticleClik here to view.
Re: OFED 2 SDP Support?? FYI OFED2 - ITS FASTER!
SDP Support has been deprecated by Mellanox.I believe OFA is supporting it still though.
View ArticleRe: Questions about GPUDirect RDMA support
Anand, Yes, this is a ConnectX as opposed to a ConnectX-3 card. One more question - do you have any idea if this is a hardware limitation of the earlier ConnectX cards, or if the lack of support is...
View Article
