Re: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Oh, another useful util is to run "lspci" to query the pci card slot and find out exactly what it's seeing. Plenty of examples on this site if you haven't seen them already.
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
DID it!! Firmware was older than supported in OFED/MLNX_OFED (2.11) .. if someone needs I can pass the .iso created (or has a server disponible to be avaliable). ---- Performing Adapter Device Self...
View ArticleRe: Very stupid MHGH28-XTC question
Just in case anyone had the same issue as me, the Connect-X Windows 7 x64 drivers seem to work fine in Windows Server 2012 using this card. I've pinged and copied a few files around so hopefully when...
View ArticleRe: VM Passthrough of MHQH19B-XTR
FLR=Function Level Reset Some reference I found: http://marc.info/?l=linux-rdma&m=133295304913103&w=2andhttp://www.mail-archive.com/linux-rdma@vger.kernel.org/msg13598.html I'm already at FW...
View ArticleConnectX-3 FreeBSD support
Hello, I see FreeBSD support listed for some ConnectX-3 adapters. Does this apply to all of them? Also is the FreeBSD ConnectX-3 software available from Mellanox and/or the open source community?...
View ArticleClik here to view.
Re: Problem driving MCX353A-FCBT with OFED3.5 on Fedora16
Justin-san, Thank you for giving me good suggestions.I thought I couldn't ask Mellanox support about driver included in OFED-3.5.I'll report this issue to Mellanox support with some additional...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
ohh... (Sorry), forgot to ask - what SW/FW level the switch is running with?
View ArticleRe: VM Passthrough of MHQH19B-XTR
Heh, I guess you're thinking of "VT" there: x86 virtualization - Wikipedia, the free encyclopedia "VT-D" isn't as fundamental. It's definitely needed for some use cases, but not everything....
View ArticleRe: Getting eIPoIB to work ?
Hi,I'm having the same issue as kenshiro. Has there been any updates? Although I'm using CentOS 6.3 64bit with MLNX_OFED_LINUX-2.0-2.0.5-rhel6.3-x86_64. What I found was when trying to manually start...
View ArticleRe: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Hi canesin,With Supermicro you should try to update using flint. They should normally provide you with .ini file anyway? Anyway flint command something like:flint -d <devicename_pci_cr0> -i...
View Articlewindows 8 pro
The whitepaper, "Deploying Windows Server® 2012 with SMB Direct over Mellanox InfiniBand End-to-End Interconnect Solutions"describes a server that's windows 2012 and a client that's 2012. Is it...
View ArticleRe: Re: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Just remembered... with flint you can query a card to extract the .ini file settings it already has: $ flint -d [PCI_bus_address_of_card] dc > somefile.ini For example, with an older card in a test...
View ArticleRe: Problem driving MCX353A-FCBT with OFED3.5 on Fedora16
Jae-Hoon Choi - That's a good tip about the "[EC] Engineering changes: A4". I didn't know that. Just tried it here on my old cards, and it works for them too.
View ArticleRe: Getting eIPoIB to work ?
Iliyas Aiyub - Ugh, that sounds like a bug. It might be worth explicitly emailing the Mellanox support team (support@mellanox.com) to let them know about it. (Eddie S - That's the correct approach...
View ArticleRe: Getting eIPoIB to work ?
Hi Justin,CentOS 6.3 is in the accepted OS. As well it gets mentioned in the release notes as compatible OS. I have already created a case, so I'll see what I get there.
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
=> setenv baudrate=38400=> saveenv=> printenv ------> disappear baudrate=38400 * If you reboot switch via reset command you can't see any message....IOI => setenv baudrate 38400=>...
View ArticleRe: VM Passthrough of MHQH19B-XTR
Hi xlx01,Can you try the (intermediate) FW 2.9.8350 from:http://www.mellanox.com/page/custom_firmware_table and let us know if it solves the problem.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Ok. All that's left to do now is make the corrupted 9024D-M environment the same as the good one isn't it? The "bootcmd" variable looks both different and important. It uses spaces in the value, which...
View ArticleRe: Re: ConnectX-3 not going up in Centos 6.4 (and SL6.4)
Great !! All adapters are in FDR mode and with latest drivers now!! \o/ .. worked with "flint -d /dev/.../..._cr0 dc" and after that mlxburn.
View Article