Re: MAC shown incorrectly in OFED 2.1? How to fix?
Hi Skoerner, ifconfig is obsolete according to Red Hat, also it shows the followng message when running it when IPoIB interfaces exists: Ifconfig uses the ioctl access method to get the full address...
View ArticleClik here to view.
Re: MCQH29-XDR Parts Question
For anyone interested, I built my own brackets.Here is how.Open Office document with pictures, about 8 MB. http://downloads.profittools.net:8000/STowle/C6100Brackets.odt Regards,S_Towle
View ArticleError messages from MLNX_OFED_LINUX-2.0-3.0.0 driver?
My current setting is:Host: CentOS 6.4Mellanox Driver: MLNX_OFED_LINUX-2.0-3.0.0-rhel6.4-x86_64 with SRIOV enabledVirtualization: KVMMellanox Card: ConnectX-3 EN So far so good for last 2 months, I...
View ArticleClik here to view.
write throughput for SRP vs. local mount?
Does anyone have an idea what theoretical max write throughput for a disk accessed via SRP vs. the same disk accessed locally? If I have a Samsung 840 SSD mounted locally, I get reliable write...
View ArticleRe: write throughput for SRP vs. local mount?
Hi!SRP target aims shared block storage.If you want compare simple storage throughput, I think SMB Direct is more good choice.
View ArticleRe: write throughput for SRP vs. local mount?
If your storage subsystem can support FDR's throughput, SRP max write throughout was limited by your PCIe slot's throughput.
View ArticleLinux VM communication on IPoIB Network
I was tried local private network from Ethernet to IPoIB.But there is some problem occurred. I have virtual Untangle VM for DHCP service and control separated private network. Windows VM works greate...
View ArticleRe: vSphere 5.1 U1 IPoIB VLAN support
I'm so sorry for my late reply.That's a vSwitch's VLAN ID for nested virtualization test environment.I prefer to test all of VMware and Microsoft virtuaization technologies.
View ArticleClik here to view.
Re: write throughput for SRP vs. local mount?
I think I get it now. For IO reads, there is an RDMA write from the target, so the throughput is just limited by the target bus speed. For IO writes, there is an RDMA read followed by an RDMA write, so...
View ArticleRe: Vmware ESXi 5.1 & ConnectX SRP Support
Yes, that is correct. Looking through my notes on when I did this: Now we can burn the new firmware image to the HCA. Being a HP branded Mellanox card, I have had to let the utility change the PSID...
View ArticleRe: Issues with SRP and unexplainable "ibping" behaviour.
I'm using the latest firmware on the Solaris Server, but a slightly older one (compatibility reasons?) on the ESXi v5.5 Server: STORAGE-SERVER:STORAGE-SERVER:/# ibstat Firmware version: 2.9.1000...
View ArticleClik here to view.
Re: FlexBoot linux IBoIP
I was very disappointed with FlexBoot. I think OptionROM has a unique room for reserve any configurations (SRP, iSCSI,PXE) like CNA's fromIntel, Chelsio, Emulex and so on. If you reboot the server then...
View ArticleRe: Error messages from MLNX_OFED_LINUX-2.0-3.0.0 driver?
Hi,what is the HCA model and FW version you have? can you post the output of ibv_devinfo command?
View ArticleRe: Error messages from MLNX_OFED_LINUX-2.0-3.0.0 driver?
while you are working on this, let me suggest: upgrade the FW to 2.30.8000 and use the later MOFED 2.1. SRIOV should be at GA level with those versions.
View ArticleRe: Error messages from MLNX_OFED_LINUX-2.0-3.0.0 driver?
Lets say I upgrade the firmware and the driver of the OS. Do I have an option to downgrade the firmware later? if so how? Downgrade functionality is a must as for some temporary period.
View ArticleRe: FlexBoot linux IBoIP
Can you elaborate which configurations got lost ? For example is ISCSI configuration is done thorough DHCP , they arepersistent. Regarding our ability to reserve configurations - let's...
View ArticleRe: FlexBoot linux IBoIP
Hi ingvar_j, "Question: What do I have to do in order to remote install a later version like RH/Centos 6.4 or 6.5 ?" Nothing! support is built in. in any case - you can find RH/CentOS 6.4 at :...
View ArticleRe: How should I use the ipoibd daemon from Mellanox Openstack Havana repo...
Hi Ale,please use this ipoib file to fix the problem http://www.mellanox.com/downloads/solutions/temp/ipoibd Let me know if that solves it. Thanks,Ophir.
View ArticleNeed help installing OFED 2.1 on Centos 6.5
Script started on Wed 12 Feb 2014 09:03:20 AM MSTThis program will install the MLNX_OFED_LINUX package on your machine.Note that all other Mellanox, OEM, OFED, or Distribution IB packages will be...
View ArticleRe: FlexBoot linux IBoIP
will try it, although it states “mlnx_en_xxxxx_rhel6.4” and I’m about to run it over IB.Can I use the same image?This install is currently in my lab servers only, but its in my master plan to...
View Article